Panel Insertion – Pultrusion 38×25 mm
This pultrusion can be inserted within the core of a 29mm composite panel to add extra strength whilst also providing access for electric cables.
Pultrusions are usually installed
- ‘across’ the panel so you can see both ends clearly
- each side of the AC hole in a composite roof panel
- when you want to avoid a ‘cold bridge’ re condensation
U
Description
DIY Caravans recommends using this pultrusion
- to support AC units on a 29mm composite roof panel
- in the ‘overhang’ of the wall panels in a slide-on camper product
- on the hinge side of the entrance door hole in the LHS wall panel
- where you require cables to run inside the panel